Installing a shower head is a relatively easy and straightforward job. But before you can install the shower head, you must first install the shower head rough-in. The rough-in is the first step in the process of installing a shower head, and it’s important that it be done correctly in order for your shower head to work properly. In this article, we’ll discuss what a shower head rough-in is, how it works, and how to install it.
What is a Shower Head Rough-In?
A shower head rough-in is a plumbing fixture that is installed in the wall behind the shower head. It consists of a metal pipe with a threaded end that is connected to the water supply line. This pipe is typically installed at a height of 8 to 10 inches off the finished floor, and it is used to connect the water supply line to the shower head.
How Does a Shower Head Rough-In Work?
Once the shower head rough-in is installed, the shower head can be connected to it. This is done by screwing the shower head onto the threaded end of the pipe. Once the shower head is securely attached, the water supply line can be connected to the other end of the pipe. This will allow water to flow from the water supply line and into the shower head.
How to Install a Shower Head Rough-In
Installing a shower head rough-in is a relatively simple process. Here are the basic steps involved:
Locate the studs in the wall where the shower head will be installed.
Mark the location of the rough-in on the wall.
Drill a hole in the wall at the marked location.
Install the shower head rough-in in the hole.
Connect the water supply line to the rough-in.
Install the shower head onto the threaded end of the rough-in.
Tips and Ideas
Here are some tips and ideas to help you get the most out of your shower head rough-in installation:
Make sure that the rough-in is installed at the correct height. It should be installed 8 to 10 inches off the finished floor.
When drilling the hole for the rough-in, use a drill bit that is slightly larger than the pipe.
If the wall is made of drywall, use a stud finder to locate the studs.
Make sure that the water supply line is securely connected to the rough-in.
Use plumber’s tape on the threads of the shower head before installing it.
When tightening the shower head, use a wrench to make sure it is securely attached.
Installing a shower head rough-in is a relatively simple job that most people can do themselves. By following the steps outlined in this article, you can easily install a shower head rough-in in your home. With a properly installed shower head rough-in, you’ll be able to enjoy a relaxing shower in the comfort of your own home.
Images Related to Shower Head Rough In:
Aurora Decor Pomelo 1-Spray Patterns 9 in. Wall Mount Fixed Shower Head Rough in Valve Trim Kit Shower Faucet Set in Black AD-88013B-9 - The Home Depot
faucet - Why is my shower head pipe very loose when the company installed a new tub and surround? - Home Improvement Stack Exchange
Plumbing in the Walls
